Products
Epoxy 100
NeverStrip Epoxy 100 Color is a 100% solids, pigmented epoxy floor coating designed to provide high gloss, chemical resistant protection in multiple color choices. NeverStrip Epoxy 100 Color™ should be used wherever a high build, protective floor coating is required.
Epoxy Primer
NeverStrip Epoxy Primer is a versatile primer for all kinds of cementitious surfaces, urethanes, epoxies, VCT and VAT (Vinyl Asbestos Tile). NeverStrip Epoxy Primer does an outstanding job of adhering to and hiding the substrate. Any of NeverStrip’s Thin Film or High Build coatings can be applied onto this flexible primer. This primer is tinted by NeverStrip to best match a topcoat color.
Extreme Performance
NeverStrip Extreme Performance is a high performance, rapid dry, Polyaspartic floor coating with outstanding performance properties. This coating is an outstanding choice with many Systems including: Broadcast Quartz; Broadcast Flakes; applications requiring hot tire resistance and many more. The in-use time is measured in hours for many applications. Corresponding to the rapid in-use time, the working time or pot life of the coating is very short. NeverStrip’s recommendation is to only mix product, which can be applied in 10 minutes after mixing.
High Solids Urethane
NeverStrip High Solids Urethane is a two component, chemical resistant, ultra high solids aliphatic polyurethane coating. It is a low VOC, compliant urethane that meets all federal and state environmental air quality standards. The high gloss or satin finish offers excellent abrasion resistance, chemical and stain resistance. It can be used on vertical or horizontal surfaces. It is ideal for concrete floors and walls in warehouses, storage facilities, aircraft hangars, animal housing, restrooms, vehicle maintenance facilities, and other applications.
Off-Gassing Primer
NeverStrip Off-Gassing Primer is a water emulsion epoxy primer designed to have maximum penetration into concrete surfaces to provide high bond strength and adhesion. The product is specially formulated to reduce concrete off gassing. NeverStrip Off-Gassing Primer™ can be applied to recently poured (green) concrete and achieve excellent adhesion. The product is ideal for new and old concrete surfaces. NeverStrip Off-Gassing Primer is use as a primer for NeverStrip High-Build and Coating Systems.
Urethane Cement
NeverStrip Urethane Cement™Systems are designed for harsh environments, where chemical, thermal shock, harsh abrasion and impacts resistance are required. NeverStrip Urethan Cement coatings are some of the toughest urethane-based concrete flooring products on the market.
NeverStrip Urethane Cement coatings have surpassed traditional epoxy flooring solutions, which had been used for many years, where thermal shock and chemical deterioration of the floor are concerns. The reasonable cost, the rapid in-use times, high traction, easy of cleaning, seamless with vertical cove base and the general all around high-performance characteristics, including thermal shock and high chemical resistance properties, make these Systems the ideal solution for commercial kitchens, food and beverage facilities, chemical processing plants, and anywhere traditional epoxy flooring may fail.
The NeverStrip Urethane Cement Systems are engineered to be crack resistant. Therefore, it is one of the most hygienic flooring solutions available. Food and beverage facilities and commercial kitchens are moist environments with organic materials. Cracks in floor coatings offer a safe haven for bacteria and other microorganisms. Cracks also offer a passage for chemicals and water to reach the substrate, which may lead to the deterioration of the substate.
NeverStrip offers Urethane Cement Systems in three variations to specifically fit project needs:
NeverStrip Urethane Cement SL-1/16″ (Self-Leveling)
NeverStrip Urethane Cement SL-1/8″ (Self-Leveling)
NeverStrip Urethane Cement TG-1/4″ (Trowel Grade)
Each system provides a seamless floor to take the punishment of the harshest food and beverage, and industrial environments. The ability to add color and/or texture with 30-mesh sand or decorative quartz is common to all versions. The two SL systems are Self Leveling. The TG version is thicker and is applied with a trowel.
The 1/16″ and 1/8″ SL Systems, respectively, can withstand up to 95% relative humidity in the concrete slab. The 1/4″ TG system is good for 100% relative humidity in the concrete slab.